Avery-dennison A64 CS Stacker Bedienungsanleitung Seite 4
- Seite / 8
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
4
Setting the Flag Sensor
The flag sensor is located on the bottom of the knife assembly and is used to cut tags with a printed
flag mark.
Note: When the position of the flag sensor is set correctly, the FLAG light flashes as tags pass
the sensor.
• Make sure the stacker is disabled. The stacker is disabled when the READY light is red.
• Place a sample tag against the guide on the knife assembly.
• Loosen the sensor thumbscrews and slide it until the arrow is pointing to the middle of the flag mark.
• Tighten the thumbscrews
•
Setting the Reflective Sensor
The Reflective Sensor is located behind the knife assembly, visible from the bottom of the stacker.
The reflective sensor can be moved by hand. Normally, no adjustment is necessary for this sensor.
Flag Mark
Arrow
Thumb-
screws
Verwandte Produkte und Handbücher für Hardware Avery-dennison A64 CS Stacker
Hardware Avery-dennison SNAP 700 Bedienungsanleitung
(153 Seiten)
(153 Seiten)
Sea gull lighting 94571-71 manuals
Owner’s manuals and user’s guides for Unknown Sea gull lighting 94571-71.
We providing 1 pdf manuals Sea gull lighting 94571-71 for download free by document types: Installation Guide
Kommentare zu diesen Handbüchern