Avery-dennison Monarch 932 Stacker Bedienungsanleitung PDF herunterladen (Seite 7)

Step 2 - Level the Stacker

1. Check the distance between the rollers and the knife. Make

sure the rollers are not touching the front of the knife or too

far from the knife. If incorrect, follow the steps below. If

correct, skip this step and move on to Step 3 - Connect the

Power Cord.

Note: The ideal position for the stacker is with the end of tray

slightly down.

2. Loosen the locking nuts with a wrench.

3. Make sure the stacker’s feet are flat on a level surface.

You can raise or lower the feet by turning them.

4. Evenly adjust both feet.

If the stacker is

touching the knife case, lower the

feet.

too far from the knife, raise the

feet.

5. Tighten the locking nuts.

Getting Started 1-3

Rollers

Knife

Locking

Nuts

1 2 3 4 5 6 7 8 9 10 11 12 ... 23 24

Keine Kommentare

Avery-dennison Monarch 932 Stacker Bedienungsanleitung Seite 7