UserManualUserManualMonarch®9416®XL®FixedFormatKitTC09416FFUM Rev. AB 1/08 ©2004 Paxar Americas, Inc. a subsidiary of Avery Dennison Corp. All rights

1-6 Introduction

Setting Up the Printer 2-1 SETTING UP THE PRINTER 1. Turn ON the printer. On the back of the printer, press (I) to turn on and (O) to turn off the p

2-2 Setting Up the Printer Selecting a Print Mode To select a print mode: 1. Press F3. -=Config Menu=- --Esc to exit 1. Set Print Mode 2. Press

Setting Up the Printer 2-3 Using Special Functions You can use the following Special Function Keys to ♦ Set Preload Data ♦ Repeat Last Entry The Pr

2-4 Setting Up the Printer

Printing Labels 3-1 PRINTING LABELS This chapter describes the data entry procedures for each format. Reminder: If you make a mistake entering data,

3-2 Printing Labels Format 1: UPC- A Date Dept & Price 1. Load 1.5" x 1.1" (1511) labels. 2. Enter the data as prompted: Prompt W

Printing Labels 3-3 Format 2: UPC- Sys 2 Date Dept & Price 1. Load 1.5" x 1.1" (1511) labels. 2. Enter the data as prompted: Prom

3-4 Printing Labels Format 3: 2 Lines & Price 1. Load 1.5" x 1.1" (1511) labels. 2. Enter the data as prompted: Prompt What You D

Printing Labels 3-5 Format 4: UPC- A Only 1. Load 1.5" x 1.1" (1511) labels. 2. Enter the data as prompted: Prompt What You Do UPC BA

Each product and program carries a respective written warranty, the only warranty onwhich the customer can rely. Paxar reserves the right to make chan

3-6 Printing Labels Format 5: 3 Lines & Price 1. Load 1.5" x 1.1" (1511) labels. 2. Enter the data as prompted: Prompt What You D

Printing Labels 3-7 Format 6: Desc UPC- A Date Dept & Price 1. Load 1.5" x 1.1" (1511) labels. 2. Enter the data as prompted: Prom

3-8 Printing Labels Format 7: Desc UPC- Sys 2 & Dept 1. Load 1.5" x 1.1" (1511) labels. 2. Enter the data as prompted: Prompt Wha

Printing Labels 3-9 Format 8: EAN- 8 Date Dept & Price 1. Load 1.5" x 1.1" (1511) labels. 2. Enter the data as prompted: Prompt

3-10 Printing Labels Format 9: UPC- E Date Dept & Price 1. Load 1.5" x 1.1" (1511) labels. 2. Enter the data as prompted: Prompt

Printing Labels 3-11 Format 10: UPC-A & Price 1. Load 1.5" x 1.1" (1511) labels. 2. Enter the data as prompted: Prompt What You

3-12 Printing Labels Format 11: To/From Address Label 1. Load 4.0" x 2.0" (4020) labels. 2. Enter the data as prompted: Prompt What Yo

Troubleshooting 4-1 TROUBLESHOOTING Problem Action The keyboard display is blank. Make sure the printer is on. Make sure the keyboard cable is secur

4-2 Troubleshooting

i TABLE OF CONTENTS Introduction ... 1-1 Overview ...

ii

Introduction 1-1 INTRODUCTION The Monarch® M09416 Kit allows you to easily create barcode labels. There are two sizes of labels and 11 preset format

1-2 Introduction Unpacking the kit components After you unpack the kit, you should have the keyboard, the printer, two power supplies, two power cords

Introduction 1-3 Connecting the Cables 1. Turn OFF the printer before you connect any cables. 2. Plug the 9-pin coiled keyboard cable into the 9 pi

1-4 Introduction The 939i keyboard does not have an ON/OFF switch. If you plug the power supply into a grounded electrical outlet, power remains On un

Introduction 1-5 Control Keys Escape. Returns the display to the previous menu. Also clears an error. Clear. Clears the entire field. Pause.