Avery Dennison Monarch 9433 SNP Spezifikationen PDF herunterladen (Seite 9)

Getting Started 1-3

System Requirements

To use the print server for printing from a wireless network, you need an

802.11b/g wireless network. The wireless network consists of either of the

following:

 An 802.11b/g wireless enabled computer printing straight to the printer

(Ad-Hoc or peer-to-peer mode).

 An 802.11b/g wireless access point allowing wireless enabled computers

to print to the print server (Infrastructure mode).

To configure and print, you need the following information from your wireless

network administrator:

 Wireless Mode (Infrastructure or Ad-Hoc)

 The SSID (service set identifier) for your wireless network.

 If you are using TCP/IP (recommended for Windows Networks) and are

not connected to a server that automatically assigns your IP address, you

need to set the printer in Static mode and assign a unique IP address (for

example: 192.168.1.14) and a subnet mask. A router (default gateway)

address is optional.

 Wireless security settings

Network Protocols Supported

 TCP/IP:

LPD/LPR, FTP, or IPP

Raw TCP/IP (port 9100 or any chosen port)

NetBIOS over IP (with SMB)

NetWare (NEST)

NetBEUI

DLC

 Telnet

 WINS

 DHCP

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 103 104

Keine Kommentare

Avery Dennison Monarch 9433 SNP Spezifikationen Seite 9