Avery Dennison Label Printer Bedienerhandbuch Seite 79
- Seite / 116
- Inhaltsverzeichnis
- FEHLERBEHEBUNG
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
If the tag can be read, you see the EPC data, such as
The programmed data is displayed in ASCII Hex format.
If the tag cannot be read “No Tag Found” appears briefly on the display. Try
slightly moving the tag forward or back in the supply path over the box antenna
and try again.
4. Press BACK until you see the Main Menu.
RF Power (Read/Write Value)
Use the RF Power menu to set the Read/Write value settings. The Read/Write value
settings increase the strength of the RF Field emitted by the printer’s antenna. The
higher the value, the greater the power of the RF Field.
For a complete list of inlays and value settings, refer to the 9906 Setup Guide and Supply
Chart.
CAUTION: Use extreme caution when increasing or decreasing the RF Power value
because the RFID tags may become non-functional!
To change the settings, from the Main Menu, select Setup, then RFID. Then follow these
steps.
1. Press or until you see
2. Press CHANGE.
3. Press or to increase or decrease the setting. After you display the value you
want, press SET. Press CANCEL to leave the RF Power unchanged.
ESCAPE
RFID
← RF Power →
-7
CHANGE BACK
RFID
← RF Power →
[-7/27] 10
1
0
S
ET
C
AN
C
EL
0123456789ABCDEF
Note: Pr
essing the left function button changes the increment/decrement amount (can
adjust to change by 1 or 10).
4. Press BACK until you see the Main Menu.
Setting RFID Options 8-3
- Operator's Handbook 1
- TABLE OF CONTENTS 5
- TOC-iii 7
- GETTING STARTED 9
- Audience 10
- Using this Manual 10
- Getting Started 1-3 11
- Using the Control Panel 12
- Selecting a Function 12
- Exiting a Function 12
- LOADING SUPPLIES 13
- Loading Labels or Tags 14
- Loading Supplies 2-3 15
- Loading Supplies 2-5 17
- Exit Cover 18
- Peel Bar 18
- Platen Roller 18
- Lower Opening 18
- Peel Roller 18
- Loading Supplies 2-7 19
- Cut Liner Here 21
- Using the Optional Tear Bar 22
- LOADING RIBBON 25
- Loading Ribbon 26
- Loading Ribbon 3-3 27
- SETTING SUPPLY OPTIONS 29
- Setting the Supply Type 30
- Setting the Ribbon 31
- Using a High Energy Ribbon 32
- Setting the Speed 33
- Setting the Feed Mode 34
- Setting the Backfeed 35
- BACK 37
- CANCEL 38
- CHANGE CANCE 40
- 10 SET CANCEL 40
- CHANGE BACK 40
- Using Batch Separators 41
- Using Skip Index 42
- Using Rotate Image 43
- Setting the Print Contrast 44
- SETTING COMMUNICATIONS 45
- Setting the Baud Rate 46
- Setting the Word Length 47
- Setting the Stop Bits 48
- Setting the Parity 49
- Setting the Flow Control 50
- SETTING DEFAULTS 53
- Setting the Monetary Sign 54
- Setting the Secondary Sign 55
- CANCE 56
- CHANGE BACK 57
- SET CANCEL 57
- Setting Defaults 6-5 57
- Setting the Power-Up Mode 58
- Changing the Prompt Set 59
- Setting the Numeric Format 60
- Using Flash Storage 61
- Using Flash Memory 62
- SELECT BACK 63
- ENTER BACK 63
- Setting Defaults 6-11 63
- Setting the Image Error Mode 65
- CANCEL 66
- Setting the Error Retry Mode 67
- Memory Guidelines 68
- USING SCRIPTS 69
- Viewing Script Information 70
- Downloading a Script 71
- Enabling a Script 72
- Deleting a Script 73
- Enabling Status Polling 74
- Using Immediate Commands 75
- SETTING RFID OPTIONS 77
- Using RFID Supplies 78
- Using the RFID Setup Menu 78
- Setting the Error Action 81
- PRINTING 83
- Printing a Test Label 84
- On-Demand Mode Printing 84
- Pausing a Batch 85
- Restarting a Batch 85
- Canceling a Paused Batch 85
- Canceling a All Batches 86
- Repeating a Batch 86
- Printing TrueType® Fonts 87
- Licensing Your Fonts 87
- CARE & MAINTENANCE 89
- Cleaning 90
- Care & Maintenance 10-3 91
- Replacing the Printhead 92
- Care & Maintenance 10-5 93
- Factory Set Password 95
- ENTER BACK 96
- Checking Supply Quality 97
- Using Password Protection 98
- Service Diagnostics 98
- Troubleshooting 99
- Error Messages 100
- Common Errors 100
- SPECIFICATIONS 103
- Supplies 104
- Ribbon Specification 104
- Cable Pinouts 105
- ACCESSORIES & OPTIONS 107
- GLOSSARY 109
- G-2 Glossary 110
- Index I-1 111
- I-2 Index 112
- Index I-3 113
- 28028 28028 116
Verwandte Produkte und Handbücher für Etikettendrucker Avery Dennison Label Printer
(11 Seiten)
(46 Seiten)Sea gull lighting 94732-71 manuals
Owner’s manuals and user’s guides for Unknown Sea gull lighting 94732-71.
We providing 1 pdf manuals Sea gull lighting 94732-71 for download free by document types: Installation Guide
Kommentare zu diesen Handbüchern